RubberSTAT D8 Anti-Static ESD Rubber Table Mat - Cut Mats
AlphaSTAT Industrial Supply
ESD Table Mats
Many In Stock
Protect your static sensitive devices with our Anti Static ESD Rubber Table Mats.
ESD Mats are designed to protect sensitive equipment, such as computers and electronics components, by safely drawing static electricity away from these components and eliminating them to earth ground. These mats work two fold: creating a safe, static free work area and by protecting the surface below from wear-and-tear from harsh processes.
How ESD Mats Work? Ground Your Mat and Yourself
Th grounding kit included with the ESD mats allows you to ground the worksurface as well as the users. Install the universal snap kit in your desired location on the mat. The ground cord connects to that snap and then is connected to a ground point in the area (usually the center screw of an outlet). The ground cord contains two ports which allows you to connect up to two wrist band and coil cords to ground the user. For large mats, we recommend installing snaps every 10 feet.
ESD mats are designed to eliminate static on its surface and of objects placed upon it. It does this by having a conductive material embedded within the mat that collects the static and sends it to ground. This is usually accomplished by connecting the mat to ground (typically the center screw of an outlet) with a ground cord. It’s important to discharge at a slow rate, therefore a resistor in the ground cord is recommended (included in the ground cord)
ESD Protection According to Industry Standards
According to ANSI/ESD S20.20, an acceptable ESD Safe Work Surface will have a point-to-point and a point-to-groundable point resistance of less than 1.0×10^9 ohms. The RubberSTAT D8 series ESD matting meet the point-to-point and point-to-groundable point resistance requirements of ANSI/ESD S20.20 when tested at both low and moderate relative humidity with a resistance meter. The material has been independently tested and meets or exceeds all industry standards for worksurfaces.
Cleaning of the ESD rubber mat should be done with water or an approved ESD Mat Cleaner. Common household cleaners should be avoided because they may contain silicon, which can affect the ESD performance of the mat.
MRO Essentials ships via the following companies:
Orders placed before 12 noon Eastern typically ship the same day.
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.
MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.
INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.