Properly clean ESD Surfaces with the Static Care Multi-Purpose Anti-Static Cleaner Designed to Maintain the Surface Resistivity of ESD Surfaces.

StaticCARE ESD mat and table top cleaner is safe and effective cleaning solution for electrostatic protected areas (EPAs) and anti-static equipment. A specialized non-hazardous, non-flammable formula removes contamination such as dirt, grease, grime, fingerprints and solder flux from all surfaces in an EPA. The residue from common cleaning products can result in an insulative surface layer, thus reducing grounding performance ESD equipment and may put your ESD sensitive products at risk.

StaticCARE ESD mat and table top cleaner may also be used to clean computer screens, computer cases, and plexiglass surfaces. Environmentally safe, it is noncorrosive, nonflammable, and biodegradable.

Directions
For ESD Surfaces such as mats or table tops, apply StaticCARE ESD mat and table top cleaner to the entire surface. Use a lint-free cloth to wipe the surface until dry. For tough stains, soak the for 30 seconds before wiping clean. For smaller surfaces, the cleaner can be applied to a cloth or swab. For computers and acrylic surfaces, dilute 1:4 with water

It is recommended to test the surface after cleaning to ensure that all insulative contaminants such as dirt and grime have been removed

CARRIERS:
MRO Essentials ships via the following companies:

SHIPPING TIMES:
Orders placed before 12 noon Eastern typically ship the same day.

SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.

MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.

INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.