CP1518 Common Point Ground Cord, 15Long, with a 10mm Male Snap, 1 Meg Resistor

 A versatile Common Point Ground Cord that connects multiple aspects of an ESD workstation to ground.

The CP1518 common point ground cord offers the common point ground required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The CP1518 common point ground are standard with two banana jacks to ground two wrist straps, a 10mm male snap, and a 1 meg resistor. The CP1518 includes a 15’ long black cord made with 7 strand tinsel wire to #10 ring terminal. It is also available with a large O-ring for military applications (CP1518BO) or with a bulldog clip and female snap (CP1518BD) for field service mats.

• A versatile Common Point Ground Cord that connects multiple aspects of an ESD workstation to ground.
• Equipped with two standard banana jacks - Grounds up to two operators at the same time
• Molded head has a 3/8" male snap for worksurface attachment
• Length: 15ft ground wire
• Connection to Ground: A 1/8" (#10) ring terminal attaches to the center screw of an outlet or other ground points
• Meets or exceeds requirements of ANSI/ESD S20.20 and ANSI/ESD S-6.1.