By MRO Essentials

ESD Laminate Worksurface

$193.28 - $242.47
Shipping calculated at checkout.
Size: 2x3
Regular price $193.28
Regular price Sale price $193.28
Availability: 36 in stock
Regular price $193.28
Regular price Sale price $193.28

ESD Laminate Worksurface Protects your static sensitive items from ESD that could cause damage during manufacturing and assembly with a tough, but stylish Anti-static  Worksurface.

Transforming Technologies’ ESD Laminate is designed for work stations where static-sensitive electronic components are manufactured and assembled. Our high pressure ESD laminate tops are the perfect answer for electronic assembly, dust-free environments for manufacturing of circuit boards and other sensitive work areas like hospitals, medical facilities, cleanrooms and laboratories. The ESD Laminate is available in beige with a radiused edge that is smooth, rounded, and free of irregularities and loose particles.

ESD Protection
Our ESD Laminate has a surface resistance (<1 x 10^9 ohms Rtg) which meets ANSI/ESD S20.20 worksurface required limit for contact with ESD susceptible items. The laminate is impregnated with a conductive layer which creates a consistent path-to-ground for static charges. In addition, the laminate resists hot solder, most solvents and fluxes.

Ready-Made ESD Worksurface

Our ESD Laminate is available in 2’x4′ and 2’x3′ mats with radius corners and includes two 10mm snaps and a common point ground cord. Our low profile common point ground cord has two banana jacks which provide a ground point for two wrist straps.

Extremely Durable ESD Worksurface

High Pressure Laminates (HPL) are one of the most used materials in the construction industry and are commonly used with interior doors, furniture and floors. HPLs are made from a number of cellulose laminations or layers of what is, essentially, paper.  These layers are impregnated with a phenolic resin and are heated while simultaneously being pressed at up to 2000 pounds of pressure per square inch. The result is a thin sheet that’s very hard and very tough.  HPL has the following advantages:

  • Strong Heat, Scratch, Stain, Chemical and Impact Resistance
  • Infiltration Resistance: Very low water absorption and moisture content
  • Hygienic Properties: moisture resistance makes it an antibacterial product, characterized by a surface so solid that dirt cannot penetrate.
  • Light Stability and UV Ray Resistance
  • Easy To Clean and Maintain
  • ESD Properties: Our laminate includes a conductive layer that allows static charges to drain to ground.

ESD Protection According to Industry Standards

The procedures follow ANSI/ESD STM7.1 for Flooring and ANSI/ESD STM4.1 for Table Tops.  The Resistance-to-Groundable Point test (used for both methods) uses a resistance meter and 5lb weighted probe on the center of the mat and measures resistance from the probe to the button snap.  The requirement is <1×10^9 ohm.  The LM1000 Series laminate sheets pass this requirement.

Creates an ESD safe work area by a providing a path-to-ground for electrical charges as well as protecting the work surface from dust and damage.

Product Attributes




10.0 lb


  • Material

    High Pressure Laminate (HPL)
  • Thickness

    Nominal 0.038" (0.96mm)
  • Surface resistance

    Less than 1 x 10^9ohms
  • Standards

  • Appearance

    Smooth Beige ESD Laminate Mat