Pocket-sized, battery-powered Surface Resistance Meter is easy to use, transport and test.
This SRM 310 uses built-in parallel electrodes to accurately measure electrical resistance  for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials such as floor mats, table mats, bins and shelving in static controlled areas. Work surfaces, bags, wrist straps, footwear, packaging materials, garments, and ESD chairs can also be tested with the device.

Powered by a 9volt battery and the small-sized makes the SRM310 the convenient tool to test large areas or travel with. The simple one button operation makes testing simple.  The results are displayed via LED lights labeled with the decade scale (powers of 10) and the meter is marked with "Conductive" Static Dissipative" and Insulative" which makes understanding the results simple.

The SRM310 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

• Pocket-Sized Digital Surface Resistance Test Kit
• Test range: 10^3-10^12
• Test voltage: 10V/100V(automatic ranging)
• Accuracy + 5%
• Built-in resistivity probes
• Carrying bag

CARRIERS:
MRO Essentials ships via the following companies:

SHIPPING TIMES:
Orders placed before 12 noon Eastern typically ship the same day.

SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.

MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.

INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.