The battery powered SRM330 is equipped with built-in parallel electrodes for quick surface measurements and includes two lightweight "travel" electrodes that eliminate the cumbersome weight of standard kits. When pressed, the travel electrodes simulate the 5lbs of pressure necessary to measure resistance point-to-point (RPP) or resistance-to-ground (RTG). This meter is designed for quick checks of surface resistance for ESD control applications in electronics manufacturing or handling environment.

Auto Selecting Test Voltage
The Surface Resistance Meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 1 x 10E5 ohms. Two banana jacks and an electrode toggle switch allow for the connection of two external 5 pound electrodes that measure surface resistance point to point (RPP) or resistance to equipment ground (RTG).

The SRM330 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

• Easy-to-read color coded readout screen
• Two lightweight "Press & Test" travel electrodes
• Built in resistivity probes
• Automatic test voltage selector
• Carrying case

CARRIERS:
MRO Essentials ships via the following companies:

SHIPPING TIMES:
Orders placed before 12 noon Eastern typically ship the same day.

SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.

MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.

INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.