SRM500K Digital Surface Resistance Test Kit
MRO Essentials
Test Equipment
Many In Stock
The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC, ANSI, ASTM test procedures.
The Ohm METRICS’ SRM500K is a digital surface resistance test kit that accurately measures the resistance of materials and performs ESD tests such as resistance-point-to-point and resistance-to-ground. The Ohm METRICS SRM500K has 10V and 100V selectable test voltage and measures ambient temperature and humidity. The kit is suitable for factory audits, material and test lab evaluations and compliance testing.
The SRM500K kit includes a surface resistance meter with a digital readout, parallel probes on the back for quick measurements, two 5lb disc probes for more specific tests, all in an easy to carry case.
Meets or exceeds requirements of ANSI ESD-S20.20 and ESDA Standard 1.1-2006.
- Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance
- 10v and 100v range voltage selection
- Automatic zeroing and power shut off
- Tests temperature and humidity
- Two 5 lb disk probes
- Built-in resistivity probes
- Carrying case
CARRIERS:
MRO Essentials ships via the following companies:
SHIPPING TIMES:
Orders placed before 12 noon Eastern typically ship the same day.
SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.
MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.
INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.
Related Products
ESD Jackets - Medium Weight Anti-Static Fabric, Lapel Collar, Knit Cuff
ESD Jackets with medium weight anti-static fabric provide high-quality ESD protection at a great value! 9010 Series jackets are fabricated from lig...
Cleanroom Compatible Metal Trash Can - 7 Gallon
7 Gallon trash can with a sleek stainless-steel look that is perfect for your office, kitchen or household. This Polder high-quality, 7-gallon tras...
BEMCOT M-3 – Static Dissipative Cleanroom Wipers
BEMCOT M-3 static dissipative cleanroom ESD wipers are suitable for nearly all electronic manufacturing and optical cleaning applications. Bemcot w...
Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord
A complete kit to install snaps and ground ESD and Anti-Static table mats according to ANSI ESD S2020 - Compatible with Wrist Straps to ground your...
Outlet Circuit Tester
Designed to detect the most common wiring problems in standard receptacles. Simply plug in and watch red and amber indicators. Excellent for testin...
Earthing Grounding Banana Jack Outlet Adapter
Converts standard three-prong USA outlets into a ground point for ESD and Earthing equipment and such as wrist strap and ground cords. The Banana J...
Dust Catcher Tacky Mats- Clean Step Adhesive Peel Off Sticky Mat - 30 Sheets a Mat - 4 Mats a Pack - 120 Sheets
Adhesive Tacky Mat for Cleanroom, Lab, Home, Office, Construction Site, Open House - Excellent Tack, 30 Sheets Per Mat, 4 Mats Per Case - 1 Case (1...
ESD Socks: Works Great with ESD Shoes and Heel Grounders
Ensure that you are electrically connected to earth ground by wearing conductive ESD socks. Conductive ESD socks ensure electrical contact between...
HG6000 Series - Full Coverage ESD Sole Grounders
Full coverage sole Grounders provide a more complete path to ground than regular heel or toe grounders due to a wider and more consistent contact a...
WB1637 Single Wire Wrist Band & Coil Cord Set - 6ft, 4mm snaps
The WB1637 is a versatile wrist strap and coil cord set with a 4mm snap and 6ft coil cord. The wrist strap set is a durable and long-lasting method...
WB8000 Wrist Band & Coil Cord Set Series -Fabric Clasp band; 6ft, 12ft cords
WB8000 Wrist Band & Coil Cord Set Series -Fabric Clasp band; 6ft, 12ft cords The WB8000 Series Wrist Band and Coil Cord set is a premium band s...
WB6000 Series Metal Wrist Band & Coil Cord Set - Metal expansion band; 6ft, 12ft cords
Durable, clean room safe ESD Metal Wrist Strap Set with 6ft, 12ft or 20ft coil cords. The WB6000 Series Metal Wrist Band and Coil Cord set is a p...
HG1390S - Hi-Vis Yellow Hook and Loop ESD Heel Grounder - 1Meg
High visibility yellow closure strap ensures that people wearing heel grounders are easily seen. The Transforming Technologies HG1390S Heel Grounde...
Cleanroom Shoe Covers - ESD-Safe - One-Size-Fits-Most - Case of 300
Disposable cleanroom shoe covers keeps the environment clean and provide ESD protection for staff on the move in controlled environments. The pla...
MT3500 - Textured Two-Layer ESD Rubber Table Mat - 0.080" Thick
Textured 0.080" thick ESD table matting provides a non-slip surface for your ESD sensitive items The MT3500-Texture series ESD-safe 2-layer rubber ...
Tacky Mats Mount - Non Skid Backing for Sticky Mats
Tacky Mat Mounts are ideal for use with cleanroom sticky mats that remove particulates from shoes and cart wheels before entering your controlled e...
ESD Jacket - Anti-Static Medium Weight Fabric, V-Neck Collar, Knit Cuff
ESD Jackets made with medium weight anti-static 9010 fabric provide high-quality ESD protection at a great value! 9010 Series jackets are fabricat...
Heel Grounder - Stretch Hook and Loop Strap in Black - For Large Footwear
Ground mobile personnel with large size footwear with long-lasting stretch Hook and Loop ESD heel grounders. The XL Heel Grounder is constructed fr...
CrossFLOW IN3000 Wide Coverage Benchtop Ionizing Blower with Heater
Excellent Static Eliminating Performance over a Large 3'x6' coverage area - Includes a heater. The CrossFLOW ionizing blower produces a powerful a...
CS0128-Stud 10mm Snap Adapter Set
The Snap Adapter Set is compatible and interchangeable with most 10mm snap studs. The CS0128 is a steel adapter that has a double 10mm socket const...
Grounding Cord - 8ft Straight Cord with Two Banana Plugs and No Resistor
Use this 8ft Grounding Cord with Two Banana Plugs to connect items to Earth Ground. Two standard banana plugs allow the cord to connect two device...
WB9000 Series Metal Wrist Band & Coil Cord Set - Metal expansion band; 6ft, 12ft cords
The WB9000 Series Metal Wrist Band and Coil Cord set is a premium band set offered by Transforming Technologies. Featuring a high quality adjustabl...
CM400 - Single Wire Continuous Monitor, One Operator Only
A single wire constant monitor for one wrist strap only. The CM400 single wire constant monitor continuously checks the total grounding system, inc...
CS1010 Push and Clinch Grounding Snaps - 10mm Female Socket
The CS1010 is an easy to install 10mm grounding snap for ESD matting. The snap can be easily removed, so it can be reused over and over again. Th...
Tough Ground Straight Coil Cords Series: 6' and 12' Lengths - 4mm, 7mm and 10mm Snap - Black
The Tough Ground Straight Plug Coil Cord Series are for grounding people and items in an ESD protected area. The cord has 2.5 mm polyurethane coil ...
Anti-Static Trash Liner - General Use - Dissipative - Pink
Use ESD trash liners to dispose of waste materials that pose a static damage threat. This pink dissipative plastic liner is appropriate for general...
Black Cleanroom Safe ESD Inspection Wiper - Size 9"x9"
Black cleanroom safe ESD wipers are for cleaning and final inspection of components in controlled environments. These cleanroom-safe black wipes h...
Anti-Static Trash Can - With ESD Symbol - 44 Gallon
Safely dispose of waste in static-sensitive areas. Anti-static trash cans eliminate the ESD threat from common plastic trash cans. Rolled rims add...
Anti-Static Trash Can - With ESD Symbol - 7 Gallon
Safely dispose of waste in static-sensitive areas. Anti-static trash cans eliminate the ESD threat from common plastic trash cans. Space efficient ...
ESD Clean Room Frocks - Polyester W/Knit Cuffs, Meet Up To Class 100 Clean Room
This Clean Room Frock is engineered to meet up to a Class 100 clean room demands for industries such as microelectronics, semi-conductors, disk dri...
Cut Resistant Anti-Static Gloves - Cut Level 3 - Uncoated - Pack of 12 Pairs
ESD cut gloves are worn when handling ESD sensitive items involving items that pose a cut risk. ESD cut resistant gloves protect sensitive items du...
ESD Grounding Cable with Alligator Clip Banana Plug and USA Outlet Plug, with Alligator Clip, 20ft Long
Quickly and easily ground yourself to a standard electrical outlet with the 20ft long Static Care ESD Grounding Cable. Quickly and easily groun...
Earthing Ground Cord - 8ft Coil Cord with Two Banana Plugs Alligator Clips - No Resistor - Clip To Everything
Use this 8ft Earthing Coil Cord to safety connect items to Earth Ground. Use our earthing coil cord with two standard banana plugs and alligator c...
Replacement Mounting Bracket for the BFN Overhead Ionizers
Replacement Mounting Bracket for the BFN Overhead Ionizers The BFN802 and BFN803 ionizer creates a dense and well-balanced ionization air flow that...
Sanitizing Wipes, 70% Alcohol - Resealable Pack of 50
MRO Essentials Alcohol Hand Sanitizing Wipes are formulated with 70% isopropyl alcohol and 30% de-ionized water that is strong enough to kill most...
SX5007 ESD Premium Scissors
These premium SX5007 ESD Scissors are ideal for use in ESD office areas, electronics sensitive areas, semi-conductors, PCB,LCD, SMT, and more. The ...
ESDBK2000 Anti-Static ESD Safe Keyboard
The ESDKB2000 is ideal for use in ESD office areas, electronics sensitive areas, semi-conductors, PCB, LCD, SMT, and more where static electricity ...
ESD Computer Mouse - Inherently Dissipative Polymer Computer Mouse
The ESDCM1000 is ideal for use in ESD office areas, electronics sensitive areas, semi-conductors, PCB, LCD, SMT, and more where static electricity ...
Pro-Mount 1-3 Roll Tape Dispenser for 50mm wide 3" core tapes, heavy duty steel desktop dispenser with blade saver
Pro-Mount 1-3 Roll Tape Dispenser steel desk top tape dispenser is a high-quality steel desktop dispenser used for tape on a 3" diameter core. T...
Moveable Aluminum Tacky Mat Base Frames - With Case of 30 Sheet Tacky Mats
Cleanroom compatible aluminum frame provides a moveable base for mounting adhesive tacky mats instead of the floor. Our aluminum frames provide a s...
Moveable Aluminum Tacky Mat Base Frames - Frame Only
Cleanroom compatible aluminum frame provides a moveable base for mounting adhesive tacky mats instead of the floor. Our aluminum frames provide a s...
MT4500 Series: Two-Layer Rubber ESD Table Mats - 0.080" Thick - 4x8
Premium 0.080" thick ESD table mats protect your static sensitive items as well as your work surface - Size'x8' - Royal Blue . The MT4500 Series Tw...
ESD Anti-Static Spudger Solder Tool For Electronics - Pry Tool Kit - Pack
An anti-static solder tool used for working on electronics, opening various kinds of smart phones, tablets, laptops, and other electronics. Also ...
Static Care Metal Adjustable Swivel Wrist Strap with 6' Cord, 1 Megohm Resistor, 4mm Snap, Black
Static Care Metal Adjustable Swivel Wrist Strap with 6' Cord Prevents dangerous electrostatic buildup while working on electronics, perfect for ser...
Anti-Static Mat and ESD Surface Cleaner - Properly Clean ESD Mats
Properly clean ESD Surfaces with the Static Care Multi-Purpose Anti-Static Cleaner Designed to Maintain the Surface Resistivity of ESD Surfaces. S...
Anti-Static ESD Safe Solvent Bottle, 6oz, Blue
Anti-Static ESD Safe Solvent Bottle, 6oz, Blue Anti-Static ESD Safe Solvent Bottles & Dispensers are made from a high density polyethylene (H...
Anti-Static ESD Safe Solvent Bottle, 8oz, Blue
Anti-Static ESD Safe Solvent Bottle, 6oz, Blue Anti-Static ESD Safe Solvent Bottles & Dispensers are made from a high density polyethylene (H...
Medium Weight 9010 Fabric, V-Neck Collar, Snap Cuff ESD Jacket
9010 Series ESD Jackets provide high-quality ESD protection at a great value! 9010 Series jackets are fabricated from light weight 90% polyester an...
Lightweight 8812 Fabric, V-Neck Collar, Snap Cuff ESD Jacket
Lightweight, breathable polyester fabric makes this jacket perfect for warm environments. The 8812 Lapel Collar jackets are fabricated from light ...