Warmbier EFM51 Electrostatic Field Meter
Warmbier
Field Meter
Many In Stock
The Wolfgang Warmbier EFM51 is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces.
The EFM51 is a full-featured hand-held field meter used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations. The EFM51 measures static voltages within ±20kV (20,000V) with a microcontroller that calculates the field strength (V/m) with a pre-selected distance (1cm, 5cm, 10cm and 20cm). Results are displayed via a 12 digit alphanumeric LCD screen. Two LED guide ring lights help position the field meter at the right distance from a charged test object.
Benefits & Features of the Wolfgang Warmbier EFM51 Static Field Meter:
Ionizer Performance Analyzer - Not Included
EFM51 may be supplemented by the EFM51.CPS "Charge Plate Set" and can also be used to check and verify ionizer efficiency and offset voltage. The kit measures static decay times from +/- 1.000volts to +/- 100volts.
The EFM51 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).
CARRIERS:
MRO Essentials ships via the following companies:
Quick Ship by MRO Essentials
At MROessentials.com, we are on a mission to delivery quality products to you quickly. That is our value proposition. We offer quick turnaround times for purchase orders and same day shipping. Place an order after 3:30pm Eastern? It will ship the next day.
SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.
MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.
INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.
Related Products
Warmbier 7220.410 Two Point Probe
The Wolfgang Warmbier 7220.410 two-point probes measures point-to-point surface resistance of small areas The 7220.410 two-point probe are designed...
Warmbier SRM200K Pocket Digital Surface Resistance Meter
Full featured digital Surface Resistance Meter with data storage, temperature and humidity testing! SRM200 is a very useful instrument for checking...
7100.RM.VU - Verification Unit for Resistance Meters
Verify that your Resistance Meters are calibrated and in working order. The 7100.RM.VU device is designed to facilitate easy, in-house, calibration...
7200.832 Clamping Electrodes
The Wolfgang Warmbier 7220.832 is designed to measure IC tubes, embossed pocket tapes and other planar or non-planar materials in ESD areas accordi...
Warmbier EFM51.CHARGE Charger for the EFM51 Charge Plate System
The EFM51.CHARGE is a handheld high voltage generator and is used with the EFM51.CPS System to measure and evaluate an ionizer's efficiency. Used t...
7100.3000.SC.2D - Bar Code Scanner for the Metriso 3000 Resistance Meter - For 2D and 1D Codes
Metriso 3000 Barcode Scanner for 2D and 1D Codes for Automatic Test Point Recording. Speed up your periodic ESD testing by utilizing bar codes on y...
Warmbier 7220.880.SET Concentric Ring Probe Model 880, with Carrying Case
The 7220.880.SET concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resist...
Warmbier 7200.CL.49 Clamp Probes for Testing ESD Garments
The Wolfgang Warmbier 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20 The 7200.CL.49 clamps probes are desi...
CM400 - Single Wire Continuous Monitor, One Operator Only
A single wire constant monitor for one wrist strap only. The CM400 single wire constant monitor continuously checks the total grounding system, inc...
7100.2000.ML - Test Leads for the Metriso Series Resistance Meters
Set of test leads for the Metriso series Surface Resistance Meters. Warmbier 7100.2000.ML Test Leads allows you to take resistance measurements wit...
7220.840.SET - Two Point Probe Set for Surface Resistance Meters
The Wolfgang Warmbier 7220.840.SET Two-Point Probes measures point-to-point surface resistance of small areas The 7220.840.SET two-point probe are ...
7100.PGT120.AD1 - Power Adapter for the PGT120 & PGT120.COM ESD Testers - USA Version
Power Adapter for the PGT120 & PGT120.COM ESD Testers from Wolfgang Warmbier - USA Version. Power adapter for the Personnel Grounding Tester PG...
RangerTWO Dual Wire Constant Monitor - Model CM1602
Dependable and accurate dual wire monitor for one operator and one work surface The RangerTWO is an extremely sensitive and reliable ground monitor...
Model CPM74 Warmbier Charge Plate Monitor
The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. Quickly and easily test ionizer decay times...
EFM250 Static Field Meter
The EFM250 is a pocket-sized, noncontacting static meter which is used to measure static charges on surfaces. Perform static surveys and evaluate c...
CM320 - Spartan Pro - Single Wire Continuous Monitor, Two Operators & One Worksurface
Ensure Your ESD Workstation is Static-Safe with a the CM320 Spartan Pro Single Wire Constant Monitor The Spartan Series Constant monitors provide o...
CM310 - Spartan Two - Single Wire Continuous Monitor, One Operator & One Worksurface
Ensure Your ESD Workstation is Static-Safe with a the CM310 Spartan Two Single Wire Constant Monitor The Spartan Series Constant monitors provide ...
CM300 - Spartan One - Single Wire Continuous Monitor, One Operator Only
Ensure Your ESD Workstation is Static-Safe with a the CM300 Spartan One Single Wire Constant Monitor The Spartan Series Constant monitors provide o...
Warmbier PGT120.COM.DT2 Data Terminal For the PGT120.COM
The Data Terminal 2 for the Wolfgang Warmbier PGT120.COM creates a data logging ESD tester system that can integrate many USB accessories. The PG...
Warmbier PGT120.COM Data Logging ESD Tester
A data logging ESD test station for ESD heel straps/footwear and wrist straps. The PGT120.COM ESD grounding tester takes quick and accurate resista...
Warmbier 7100.PGT120.COM.TC18 Data Terminal With Touch Screen For the PGT120.COM
The 7100.PGT120.COM.TC18 with Touch and Data Terminal for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the 7100.PGT120.CO...
Warmbier 7100.EFM51.CPS.SET Charge Plate System without EFM® 51 (for retrofitting)
The Wolfgang Warmbier EFM51.CPS is used to retrofit the EFM® 51 to enable the meter to measure and evaluate an ionizer's efficiency. The Warmbier ...
Warmbier EFM51 Plus Electrostatic Field Meter
The Wolfgang Warmbier EFM51 Plus is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 Plus is...
Warmbier 7100.VB - Veribox
Verify That Your ESD Test Equipment are Operating Correctly with the Warmbier 7100.VB - Veribox Warmbier 7100.VB - Veribox is for the periodic ver...
Warmbier 7100.2000.TR50 - 50ft Cable Reel
Make testing floors easier with a 50ft cable reel used with probes to take resistance measurements over large areas. Warmbier 7100.2000.TR50 - 50ft...
Warmbier 7220.870.V.SET Extension Handle For Use with Probes
Make testing ESD floors easier with an extension handle for 5lb disk probes used to take resistance measurements. Wolfgang Warmbier Model 7220.870....
Warmbier EFM51.VK Electrostatic Field Meter Verification Kit
Verification Kit for measuring electrostatic fields and electrostatic charges, as well as the body voltage of a person while performing the walking...
Warmbier SRM200VK Pocket Digital Surface Resistance Verification Kit
Full-featured digital Surface Resistance Meter with lightweight travel probes, two-point probe, data storage, temperature and humidity testing! SRM...
Warmbier EFM51.CPS Charge Plate System and Field Meter
The Wolfgang Warmbier EFM51.CPS is used to measure and evaluate an ionizer's efficiency as well as fully functioning field meter. The EFM51 is a f...
Warmbier 7220.45 Hand Probes for Testing ESD Floors
The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in th...
PGT120.CU.12- Calibration Verification Device
Verify that your PGT120 combo testers are calibrated and in working order. The PGT120.CU device is designed to facilitate easy, in-house, calibrati...
Warmbier METRISO® B530 ESD Audit Kit
Complete ESD Audit Kit for Testing and Evaluations of an ESD Control Program The METRISO® B530 ESD-Audit-Kit includes the relevant test instrumen...
Warmbier 15 Glove Probe
Probe used to take accurate resistance measurements of ESD Gloves. Model# 15 Glove probe is designed to evaluate ESD gloves according to ANSI ESD20...
PDT78PV - Verification Unit for the PDT700K and PDT800K
Verify that the PDT800K combo tester are operating correctly. The PDT700K and PDT800K are factory calibrated and annual calibration is not neces...
CAL1000 - Calibration Verification Device
The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is...
Warmbier PGT120.COM.DT3 Data Terminal with RFID For the PGT120.COM
The Data Terminal 3 for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the PGT120.COM Data Terminal3 and you receive real-...
Warmbier ESD Starter Kit with Field Meter and SRM Meter
A kit to test basic ESD measurements such as surface resistivity and electrostatic fields. A complete and very useful tool kit for testing and meas...
Warmbier EFM51WT Field Meter Walking Test Kit
A hand-held meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The el...
Warmbier Walking Test Kit WT5000 Electrometer
Perform the ESD Walking Kit on Floors: Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC St...
Warmbier TF-530 Digital Thermo-Hygrometer
The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and e...
Warmbier 900 Backrest Probe
Probe used to take accurate resistance measurements of ESD chairs. The 900 Backrest probe is designed to evaluate ESD chair back-rests according t...
Warmbier 890 Two Sided Probe
The 890 two-side probe is two ESD testing probes in one: a 5lb disk probe and a concentric ring probe. The 890 two-sided probe is used with a surfa...
SR0065 5lb Surface Resistance Probes
5lb Disk Electrode Probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in acc...
SR0055 5lb Surface Resistance Probes
5lb Disk Electrode Probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in a...
SRM310 Pocket Digital Surface Resistance Test Kit
Pocket-sized, battery-powered Surface Resistance Meter is easy to use, transport and test. This SRM 310 uses built-in parallel electrodes to accura...
SRM330 Lightweight Travel Surface Resistance Meter Kit
The ultimate travel kit for testing materials for electrical resistivity/resistance - Lightweight and portable! The battery powered SRM330 is equ...
SRM500K Digital Surface Resistance Test Kit
The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical ...
Warmbier SRM110 Pocket Digital Surface Resistance Test Kit
Quickly and accurately take ESD resistance measurements with the Warmbier SRM110. The LED readout will report the resistance in powers of 10 (ex...
Warmbier METRISO®B530 Surface Resistance Test Kit
Use the Warmbier METRISO®B530 Surface Resistance Test Kit to take quick and accurate ESD measurements of materials with this high resistance testin...