Verification Kit for measuring electrostatic fields and electrostatic charges, as well as the body voltage of a person while performing the walking test. Additionally, the decay time and the offset voltage of ionizers can be measured.

The Warmbier EFM51.VK Verification Kit is a full-featured Static Field Meter Kit that can test static fields, ionizers verification and test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5.

ESD Verification Kit:  Perform Three Important Tests in Static Control with One Kit - Measure Static Fields, Perform the Walking Test and Verify the Performance of Ionizers.  Features Include:

Field Meter

The EFM51 measures static voltages within ±20kV (20,000V) with a microcontroller that calculates the field strength (V/m) with a pre-selected distance (1cm, 5cm, 10cm and 20cm). Results are displayed via a 12 digit alphanumeric LCD screen. Two LED guide ring lights help position the field meter at the right distance from a charged test object.

Charge Plate System

The EFM51.VK can be used to evaluate ESD ionizers efficiency as well as perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations. The meter measures the decay time from +1.000V to +100V or -1.000V to -100V with its integrated start-stop timer. The plate is charged manually via the handheld high voltage generator.

Walking Test

The electrostatic charge of a person walking on an ESD safe floor with ESD safe footwear can be measured with the EFM51.VK. This test provides measurement data on the actual charge on a person while walking which is used to determine the effectiveness of the floor/footwear grounding system. The EFM51 holds the PEAK value of the measured body voltage, as well as the LIVE static voltage measured on the operator’s body.

The EFM51 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

CARRIERS:
MRO Essentials ships via the following companies:

Quick Ship by MRO Essentials

 At MROessentials.com, we are on a mission to delivery quality products to you quickly. That is our value proposition. We offer quick turnaround times for purchase orders and same day shipping.  Place an order after 3:30pm Eastern?   It will ship the next day.

SHIPPING CHARGES:
All shipments are FOB FACTORY. Purchaser is therefore responsible for both shipping charges and damage to goods in transit. Note that freight charges are based on weight AND volume. Assembled items take up a greater shipping volume and are typically charged at a higher freight rate than items shipped flat. Purchaser must specify a freight carrier at time the order is placed or MRO Essentials will choose a carrier and prepay shipments. The freight cost of prepay shipments will be added to each invoice unless otherwise specified. NOTE: Request to ship UPS 1st, 2nd, or 3rd day is a method of shipment and does not imply any expediting of order processing by MRO Essentials. For non-UPS shipments, the order will be shipped freight collect or third party billing at purchaser’s option. Purchaser is responsible for and agrees to pay (1) charges disallowed or billed back to MRO Essentials by third parties when purchaser has specified third party billing and (2) charges billed to MRO Essentials for corrections made by the carrier including address corrections. Some carriers may not be available to be used by MRO Essentials. Purchaser will be notified if an alternate carrier is required.

MULTIPLE SHIPPING POINTS:
MRO Essentials products are manufactured in various locations. Shipping points may vary and may change without prior notice.

INSURING YOUR SHIPMENT:
You are responsible for your shipment once it leaves the F.O.B. point. We recommend that you insure all shipments. It is our policy to insure shipments unless otherwise specified. The buyer is responsible for uninsured lost or damaged shipments.